museum exhibit case

Solutions for Museums, Galleries and Collectors

Home  |  Museum Display Cases  |  Stuttgart Table Display Case  |  Stuttgart Table Display Case - 60" Wide x 8.3" Glass Height
Museum display case at ADE
Table case with steel legs
Museum display case at ADE
Museum display case at ADE

Stuttgart Table Display Case - 60" Wide x 8.3" Glass Height

Item #: STC6000

Availability: Built to Order
Usually ships In 10-12 Weeks

** Ships directly from Germany - You will be notified with shipping quote.

**Order will be processed after your approval.**

* Upgrade options available

Price: $6,636.00

    Option "A" - Upgrade to Low Iron Glass
    1 $395.50
    Option "B" - Build with Miter Hood Construction
    1 $574.00
    Option "C" - add LED Light Bar
    1 $1,254.75
    Option "D" - Upgrade from Steel Legs to Panel Legs
    1 $647.50
    Option "F" - add Climate Compartment
    1 $805.00

    38.3"H x 60"W x 24"D x 8.3" Glass Height

    **"Options" are "add-ons" and are not sold by themselves. They must be bought in addition and added on to the STC60 table case.

    ***Ships in 10 to 15 weeks.

    Cases are made in Germany and shipping is usually over $1000 per case.

    Additional Information

    Width (N1): 1524 mm (60") 

    Depth (N2): 610 mm [24"] 

    Height of base construction (N3): 762 mm [30"] 

    Visible glass height (SGH): 211 mm [8.3"] 

    Overall height: 973 mm [38.3"] 

    Classifications: MDF: ZF MDF, fire retardant class B2 / Euroclass D

    Locks: DOM security locks with a minimum of 5 pins

    Glazing: The vertical glass panes and the lid pane are made of 8,76 mm thick laminated safety glass that comprises two glass panes each 4 mm thick that are specially bonded to each other with a two ply inter layer. This meets the European anti bandit standard of DIN EN 356 class P2A. This glass includes a UV Protection for the inside of the display area.

    Coating: According to RAL color card "Classic"

    Fabric: According to Baumann Ultra V range.

    Corpus: The display case is constructed from 4 vertical glass walls, a lid pane and a base construction (Delivery as an assembled unit).

    Glass case: All exposed edges rounded off and polished. The panes close flat against each other (butt joints). The lid pane is a rectangular glass panel with a 1.5 mm projection all around. The butt joints are connected by clear adhesive.

    Opening: The 5 sided glass corpus solidly sealed with the angular frame can be opened by means of gas pressure springs. The axis of rotation is not visible.

    Locking: 1 or 2 safety cylinder lock is built in concealed in the base construction of the display case on the side (N2).

    Key suiting: TBD.

    Base construction: Solid frame is made of welded steel profiles. The tubular steel legs are made of square rods (35 x 35 mm) with leveling feet. The blind for glass installation is made of an angular frame 60 x 40 mm. Visible surfaces are color coated.

    Display plate: The display plate is made from ZF MDF. Visible surfaces are covered with fabric.