museum exhibit case

Solutions for Museums, Galleries and Collectors

Home  |  Museum Display Cases  |  Stuttgart Freestanding Display Case  |  Stuttgart Freestanding Display Case - 24" wide
Museum display case at ADE
Freestanding Display Case
Museum display case at ADE
Museum display case at ADE

Stuttgart Freestanding Display Case - 24" wide

** Ships directly from Germany - You will be notified with shipping quote.

**Order will be processed after your approval.**

* 7 upgrade options available

    Tell A Friend

    Stuttgart Freestanding Case, no lighthood
    1 $7,267.75
    Option "A" - Upgrade to Low Iron Glass
    1 $400.75
    Option "B" - add LED light hood
    1 $2,065.00
    Option "D" - Add second lock in lighthood
    1 $446.25
    Option "E" - add Climate Compartment
    1 $892.50
    Option "F" - add one additional shelf
    1 $117.25
    Option "G" - add fabric back panel
    1 $899.50

    78"H x 24"W x 24"D

    **"Options" are "add-ons" and are not sold by themselves. They must be bought in addition and added on to the SFC24 freestanding case.

    ***Ships in 10 to 15 weeks.

    Cases are made in Germany and shipping is usually over $1000 per case.

    Additional Information

    Width (N1): 610 mm [24"] Depth (N2): 610 mm [24"] Height of base construction (N3): 100 mm [4"] Visible glass height (SGH): 1880 mm [74"] Overall height: 1980 mm [78"] Classifications: MDF: ZF MDF, fire retardant class B2 / Euroclass D Locks: DOM security locks with a minimum of 5 pins Glazing: The glass walls are made of 8.76 mm thick laminated safety glass that comprises two glass panes each 4 mm thick that are specially bonded to each other with a two ply interlayer. This meets the European anti bandit standard of IN EN 356 class P2A. This glass includes a UV Protection for the inside of the display area. Coating: According to RAL colour card "Classic". Fabric: According to Baumann Ultra IV range. Corpus: The display case is constructed from 4 vertical glass walls 1 of which is a full width hinged door a lid pane and a base construction (Delivery as an assembled unit). Glass case: All exposed edges rounded off and polished; butt/mitred joints are connected by a black elastic adhesive. Opening: The full width front opening hinged door has unobtrusive fittings on the horizontal door edges without impairing the transparency. The vertical joints of the door opening are sealed with a black elastic sealant. Locking: 1 safety cylinder lock are included for the hinged door. It is built visible in the base construction of the display case on the side to be opened. Key suiting: TBD. Base construction: The base construction is a 5 sided closed pedestal that is made from ZF MDF with vertical joints mitred. There are levelling feet built into the base construction to align the display case correctly. Visible surfaces are colour coated. Display plate: The display plate is made from ZF MDF. Visible surfaces are covered with fabric . Shelving system: The shelving system uses 4 stainless steel rods and 2 glass shelves made from 8 mm thick float glass. Special supports allow the shelves to be adjusted to any height without the use of tool.