museum barrier

Solutions for Museums, Galleries and Collectors

Home  |  Stanchions and Barriers  |  Freestanding Art Stanchions
Art Display barriers, Gallery barrier, Museum Barrier, gallery barriers, gallery protection, gallery post
Art Display barriers, Gallery barrier, Museum Barrier, gallery barriers, gallery protection, gallery post
Art Display barriers, gallery barrier,  gallery barriers,  museum guidance, gallery guidance
Art Display barriers
ADE Art Stanchion Barrier, Gallery barrier, gallery barriers, museum barriers
Art Display barriers, Museum Protection
Art Display barriers, Museum Protection
Art Display barriers, Museum Protection
Art Display barriers, Museum Protection
Art Display barriers
ADE Art Stanchion Barrier
ADE Art Stanchion Barrier
ADE Art Stanchion Barrier
ADE Art Stanchion Barrier
ADE Art Stanchion Barrier
Q-Cord signage, Museum Signs, Automotive display
Q-Cord signage, Museum Signs, Automotive display
Sema, Automotive museum, Car Show, Automotive theme

Freestanding Art Stanchions



* Neutral, clean lines that blend with the environment

* Stable base with non-skid Polyurethane pads

* Click here for elastic cord

* FREE SHIPPING OPTIONS HERE

*Options to accommodate signage and tie-back to wall

* Click here for wall terminators

*Made in the USA




     SKU INFO COLOR QTY BREAK PRICE QUANTITY
    AS-G16FS
    16"H with 9" x 9" base
    Grey 1 - 2
    3+
    $119.00
    $109.00
    AS-G24FS
    24"H with 9" x 9" base
    Grey 1 - 2
    3+
    $129.00
    $119.00
    AS-S16FS
    16"H with 9" x 9" base
    Stainless Steel 1 - 2
    3+
    $189.00
    $175.00
    AS-S24FS
    24"H with 9" x 9" base
    Stainless Steel 1 - 2
    3+
    $199.00
    $185.00
    AS-B16FS
    16"H with 9" x 9" base
    Black 1 - 2
    3+
    $119.00
    $111.00
    AS-B24FS
    24"H with 9" x 9" base
    Black 1 - 2
    3+
    $129.00
    $119.00
    AS-BR16FS
    16"H with 9" x 9" base
    Bronze 1 - 2
    3+
    $119.00
    $111.00
    AS-BR24FS
    24"H with 9" x 9" base
    Bronze 1 - 2
    3+
    $129.00
    $119.00
    AS-W16FS
    16"H with 9" x 9" base
    White 1 - 2
    3+
    $119.00
    $111.00
    AS-W24FS
    24"H with 9" x 9" base - call to order
    White 1 - 2
    3+
    $129.00
    $119.00
    AS-SSCS
    45° Signage Cap used on art stanchions for Label Holder. Stainless Steel. (Adapter unit only) (Uses double sided tape)
    Stainless Steel 1 $70.00
    AS-SSCL
    45° Signage Cap used on art stanchions for Signage Plates. Stainless Steel. (Adapter unit only)
    Stainless Steel 1 $70.00
    Custom Art Stanchion
    Customized art stanchion
    Custom 1+
    CALL
    PRODUCT DETAILS

    This Gallery barrier is the standard in many of the world's major museums.

    The stable steel base and upright supports an elastic cord that defines restricted access but gives to the touch without tripping or injury. The base is cushioned with slip resistant polyurethane pads to improve grip and protect polished floor surfaces.

    We recommend a maximum of 7 to 8 feet or 2 to 3 meters between barriers when planning your layout.


    Things you'll Need:

    Barriers

    Elastic Cord (75 foot rolls)

    Wall terminators (Possibly)

    **Sold individually**


    **elastic cord not included**


    Did you know we manufacture most of our products in New Jersey and our full service shop is always making custom versions of products.  If you have any special needs let us know!

    Additional Information

    ACCESSORIES FOR THE FREESTANDING STANCHION

    You will of course require elasticated cord to go with your stanchion layout.

    Wall terminators are an excellent way to complete some stanchion installations by returning the line of cord back to the wall.

    You can now apply information signage directly to the top of our barriers by using one of our signage adaptors that will accept our range of aluminum label holders.

    Our stanchions are supplied complete with an Allen key and that is the only tool you will require to assemble them.

    USEFUL TIPS AND GUIDELINES

    It is important to select a stanchion finish that blends well with the environment and minimizes visual impact, and to assist this process our standard cord color is grey. However in areas where it is important to draw attention to the line we can supply cord in a range of colors that will enhance the contrast. These are white, red or black.

    If a floor is highly polished the stanchions will need to be closer together (5') than a floor that has plenty of grip, in which case barriers can be spaced further apart (7').

    Whenever possible stanchions should be placed in a symmetrical fashion in front of an artwork as this maintains good overall viusal harmony.

    INSTALLATION INSTRUCTIONS FOR GREY PPC

    1. Assemble the stanchion by removing the bolt from the end of the upright, check that the washer is on the bolt and put it through the hole of the base plate and into the end of the upright. Tighten securely with the Allen Key provided.
    2. Place the stanchions in position to protect the artwork allowing 5' to 7' between each. Be sure to check the cord does not ‘droop’ between stanchions.
    3. Insert the end of the cord into the space under the cap and wrap the cord around the stem once or twice and out through one of the slots. Hold the cord in place and push the cap down until you hear a click.
    4. Pull the cord tight to the next stanchion with enough tension to make a straight line and push into the slots: straight across if it is a straight line or at right angles if it is at a corner.
    5. Repeat step 4 for the last stanchion or use a wall terminator.

    In an installation where the object is completely surrounded, repeat step 5 with both cord ends. In this instance it is only necessary to wrap once around the stem.

    A line of stanchions can also end with the cord returning to the wall by using a wall terminator.

    INSTALLATION INSTRUCTIONS FOR STAINLESS STEEL

    Stanchions are usually packed 2 per inner box but are sold individually and complete with an Allen key.

    1. Assemble the barrier by placing the stainless steel cover over the heavy black baseplate.
    2. Remove the bolt from the end of the upright, fit the washer onto the bolt and place it through the central hole of the base plate and cover and into the end of the upright. Tighten securely with the Allen Key provided.
    3. Place the barriers in position to protect the artwork allowing 1.5 to 2 metres between each. For the best result be sure to check that the cord does not ‘droop’ between barriers.
    4. When you have the desired layout, lift up the top cap until there is a gap large enough to insert the cord.
    5. Insert the end of the cord into the space under the cap and wrap the cord around the stem once or twice and out through one of the slots. Hold the cord in place and push the cap down until you hear a click.
    6. For intermediate barriers, pull the cord tight to the next barrier with enough tension to make a straight line and feed the cord in through one slot, around the cap stem and out through the appropriate slot. Straight through for a line of barriers and ninety degrees at a corner.
    7. Repeat step 5 for the last barrier or use a wall terminator.
    8. When the layout is complete, make sure all caps are pushed down correctly so that the cord is secure on the top of the barrier. Note: In an installation where the object is completely surrounded, repeat step 5 with both cord ends. In this instance it is only necessary to wrap once around the stem. A line of barriers can also end with the cord returning to the wall by using a wall terminator.

    Note: In an installation where the object is completely surrounded, repeat step 5 with both cord ends. In this instance it is only necessary to wrap once around the stem. A line of barriers can also end with the cord returning to the wall by using a wall terminator.

    Other ResourcesWhat's in the Box

    1 Upright with attaching bolt and injection molded cap

    1 Base weight
    1 Base cover plate
    1 Allen key

    What's not included: Elasticated Cord, Wall Terminators

    RELATED ITEMS
    ADE barrier wall terminators
    starting at:
    Price: $18.00-$30.00
    ADE elastic cord
    starting at:
    Price: $14.00-$59.00
    ADE elastic cord
    starting at:
    Price: $15.00-$39.00
    Wells Fargo Museum
    starting at:
    Price: $275.00-$449.00