Museum Signage Systems
The Q-cord signage options include the easy to use double sided snap frame option which is all inclusive ready to go. Just open the four sides of the frame insert your sign then snap the sides closed. There are also vertical and 60 degree signage caps that are used with sign holders that are sold separately** and come in four options.The MS-1185SP has the end strips on the 11" sides and the MS-8511SP has the end strips on the 8.5" sides. The MS-1185SP can be used in both landscape and portrait positions using the set screw on the info stand. The MS-8511SP should only be used in the landscape position as it will be off center if used in the portrait position.Hand Sanitizer Cap provides a convenient and durable way for you to mount your favorite hand sanitizer dispenser onto the top of your existing Q-Cord barriers. Add one at the start of your queue and wherever you would like visitors to have to ability to sanitize their hands. Includes 4x6 Label holder for displaying your message.
Museum Display and Queue Barriers
Museum barriers are typically used to queue and control visitors throughout a museum or institution. Taller barriers are usually used for directing foot traffic in a particular path or direction. Shorter barriers can be used for surrounding items such as works of art to keep visitors from touching or getting too close. There are a number of barrier options that can be used, such as belts or ropes, but most museums prefer the more refined sophisticated approach of a straight cord. This gives a nice clean look that does not distract from the object being viewed. Museum barriers should also adhere to ADA (Americans with Disabilities Act) standards. The belt or cord on a typical barrier is too high. According to the ADA, the cord or belt must be cane detectable and located within 27 inches off of the finished floor or ground.
The new Q-Cord Retractable Barrier is made by 10-31 Inc., which is one meter(39.375") high and has two retractable cords. The lower cord is half a meter(19.75”) off of the ground to be ADA compliant.
Below is the info from the ADA website:
From 2010 ADA Standards for Accessible Design2
307 Protruding Objects
307.1 General. Protruding objects shall comply with 307.
307.2 Protrusion Limits. Objects with leading edges more than 27 inches (685 mm) and not more than 80 inches (2030 mm) above the finish floor or ground shall protrude 4 inches (100 mm) maximum horizontally into the circulation path.
EXCEPTION: Handrails shall be permitted to protrude 4 1/2 inches (115 mm) maximum.
Advisory 307.2 Protrusion Limits. When a cane is used and the element is in the detectable range, it gives a person sufficient time to detect the element with the cane before there is body contact. Elements located on circulation paths, including operable elements, must comply with requirements for protruding objects. For example, awnings and their supporting structures cannot reduce the minimum required vertical clearance. Similarly, casement windows, when open, cannot encroach more than 4 inches (100 mm) into circulation paths above 27 inches (685 mm).