museum exhibit case
Notice!!: We will be closed from 7/1 to 7/8
** Ships directly from Germany - You will be notified with shipping quote.
**Order will be processed after your approval.**
* 4 upgrade options available
54"H x 20"W x 20"D x 18" Glass Height
**"Options" are "add-ons" and are not sold by themselves. They must be bought in addition and added on to the SPC20 pedestal case.
***Ships in 10 to 15 weeks.
Cases are made in Germany and shipping is usually over $1000 per case.
Width (N1): 508 mm [20"]
Depth (N2): 508 mm [20"]
Height of base construction (N3): 914mm (36")
Visible glass height (SGH): 457 mm (18")
Overall height: 1372mm (54")
MDF: ZF MDF, fire retardant class B2 / Euroclass D
Locks: DOM security locks with a minimum of 5 pins
Glazing: The vertical glass panes and the lid pane are made of 8,76 mm thick laminated safety glass that comprises two glass panes each 4 mm thick that are specially bonded to each other with a two ply interlayer. This meets the European anti bandit standard of DIN EN 356 class P2A. This glass includes a UV Protection for the inside of the display area.
Finish: According to RAL colour card "Classic"
Fabric: According to Baumann Ultra IV range.
Glass case: All exposed edges rounded off and polished. The panes are butt joined with square edges. The lid pane is a rectangular glass panel with a 1.5 mm projection all around. The butt joints are connected by clear adhesive.
Opening: The 5 sided glass cover is fixed to a steel frame and can be lifted off completely with a special suction device.
Locking: There are 2 safety cylinder locks included. They are built in visible in the base construction on opposite sides.
Key suiting: TBD.
Base construction: The base construction is a 5 sided closed pedestal that is made from ZF MDF with vertical joints mitred. There are levelling feet built into the base construction to align the display case correctly. Visible surfaces are colour coated.
Display plate: The display plate is made from ZF MDF. Visible surfaces are covered with fabric.